Lỗi máy in printer settings could not be saved năm 2024

Nội dung chính Show

Fix: Printer Settings Could Not Be Saved
Fix 1: Run the Printer Troubleshooter
Fix 2: Restart Print Spooler
Fix 3: Check the Related Sharing Settings
Fix 4: Check the Server Service Status
Bottom Line:
About The Author

When a printer is shared, Windows 7 or Windows Server 2008 R2 may return one of the following errors: "Windows could not share your printer. Operation could not be completed (Error 0x000006D9)" "Printer Settings could not be saved. Operation could not be completed (Error 0x000006D9)"

<Cause> This issue may occur if you have stopped or disabled the Windows Firewall Service. To share printers in Windows 7 or in Windows Server 2008 R2, you must have the Windows Firewall Service enabled. <Resolution> To resolve this issue, set the Windows Firewall Service to Automatic, and then start the service.

Please refer to the following Microsoft Knowledge Base for additional information. http://support.microsoft.com/kb/2123653/

In our daily life, printer plays an important role in transferring our data into tangible documents. Some people encountered a series of issues when using the tool, such as “printer settings could not be saved”. To resolve the issue, you can follow the post on the MiniTool Website for details.

On This Page :

People reported that when they attempt to connect the printer to the home network, the error message – Printer settings could not be saved this operation is not supported – will happen.

The major reasons that trigger the “Printer settings could not be saved” error are varied, such as incorrect printer settings, issues with Windows Registry, driver conflicts, or network issues.

For these factors, you can follow the solutions in the next part.

Fix: Printer Settings Could Not Be Saved

Fix 1: Run the Printer Troubleshooter

The Printer troubleshooter is a built-in utility designed to fix common printer problems on Windows 11/10. If you encounter the printer issues, you can do these steps.

Step 1: Go to Start > Settings > Update & Security > Troubleshoot > Additional troubleshooters.

Step 2: Then click Printer from the right window and click Run the troubleshooter.

When it finishes, check if the “Printer settings could not be saved” error has been gone.

Fix 2: Restart Print Spooler

Another method is to reset the Print Spooler service. In this way, you will need to delete your pending files in the spool, so you’d better backup data first before you start the move.

You can use MiniTool ShadowMaker free to backup files, folders, partitions, disks, and systems. The backup steps are easy and quick. Its user-friendly interface can guide users to quickly access all the functions. To download and install this program, you can click the button below.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Then you can start resetting the service.

Step 1: Open Services by typing it in Search and scroll down to locate and double-click on Print Spooler. Click Stop to end the service.

Step 2: You can click OK to save the changes. Then Open Run by pressing Win + R and type Spool to quickly open the C:\Windows\System32\spool folder. Now, open the PRINTERS folder.

Step 3: When you see a print queue sub-folder, delete all the files in it and then get back to restart the Print Spooler service in the Services window.

You need to make sure some sharing settings are enabled so that the printer can be accessed via a network. After the following steps, the “Printer settings could not be saved” error may be fixed.

Step 1: Open Control Panel and go to Network and Internet > Network and Sharing Center > Change advanced sharing settings.

Step 2: Under Guest or Public, check the options of Turn on network discovery and Turn on file and printer sharing. Check the box next to Turn on automatic setup of network connected devices.

Then click Save changes to get the options applied.

When you settle down, go to see if you fixed “printer settings could not be saved”.

Fix 4: Check the Server Service Status

The Server service is responsible for sharing files and printers on your computer, so please make sure the service is working well.

Step 1: Still, open the Services window and scroll down to locate Server.

Step 2: Double-click on it and make sure the Service status is Running and the Startup type is set to Automatic. If not, change the settings and click Apply > OK to save it.

Bottom Line:

To fix the “Printer settings could not be saved” issue, you can refer to these four methods for troubleshooting. Hope this post can be useful for you.

About The Author

Position: Columnist

Anna is an editor of the MiniTool Team. She worked in this big family since her graduation. Her articles mainly focus on data backup and recovery, disk cloning, and file syncing, committed to resolving the data loss issues users may encounter on their PCs. Besides, more related computer articles are shared here. In her leisure time, she enjoys reading and watching movies. Travel can also be a good choice for her.